如果您對該產品感興趣的話,可以
產品名稱: 晰寫速CCS圖像處理光源PFB3(A) Series
產品型號: PFB3-20SW-PJT-DJ3(A)
產品展商: 日本CCS晰寫速
產品文檔: 無相關文檔
簡單介紹
晰寫速 CCS圖像處理光源 深圳市偉燁鑫科技有限公司
晰寫速CCS圖像處理光源PFB3(A) Series
的詳細介紹
| LED發光顏色 |
White |
| 相關色溫 |
5,700 K typ. |
| 外觀尺寸 |
W 70 mm x D 150 mm x H 100 mm
(not including connectors, knobs, legs, and other projections)
Please refer to the "Dimensions" tab for light guide adapter dimensions chart. |
| 通道數 |
1 channel |
| 發光方式 |
常時發光 |
| 驅動方式 |
Constant-current system |
| 調光方式 |
可變電流控制 |
| 輸入電壓 |
24 VDC (rated)
21.6 to 26.4 VDC (range) |
| 消耗功率 |
18 W typ. |
| 絕緣耐壓?絕緣電阻(輸入-FG) |
Insulation resistance: 500 VDC, 1M Ω min.
Withstanding voltage: 250 VAC for one minute, cutoff current: 10 mA |
| 外殼材質 |
Aluminum alloy |
| 調光 |
Manual
Continuous control using the intensity control knob
Remote
Light intensity can be controlled in 256 steps using the 8-bit light control signals from an external source.
Note: The light intensity of this product is very faint when the intensity control knob is set to the minimum intensity.
Using the Remote/Manual switch on the front panel |
| 錯誤檢測顯示 |
An error indicator lamp on the front panel flashes (0.5 sec) and output stops |
| 使用溫濕度 |
Temperature: 0 to 40℃, Humidity: 25 to 85%RH
(No condensation) |
| 保存溫濕度 |
Temperature: -20 to 60 ℃, Humidity: 20 % to 85 %RH (with no condensation) |
| 冷卻方式 |
Forced air cooling, Intake vents: sides, Exhaust vents: rear |
| 輸入端口 |
DC jack for power supply, Terminal block for power supply, External Control connector (15-pin D-sub) |
| 適合規格 |
CE, UKCA, RoHS, IEC 62471（Low risk） |
| 重量 |
1,200 g max. |
| 附屬品 |
使用說明書 |
| 注意事項 |
Be sure to confirm the specifications of the light guide before use. |
